Wedi 610 Adhesive Sealant – 310ml

wedi 610 adhesive sealant is a versatile single-component adhesive and sealant. It is used as a system component for the wedi sealing system.

Better to be safe than sorry. As a versatile single-component adhesive sealant, wedi 610 adhesive sealant is especially suited to waterproof butt joints of building boards. Furthermore, wedi 610 adhesive sealant has outstanding resistance to the elements; and to chemicals; and is also free of solvents, silicon and PCP.

As an abP-approved system, the combination of wedi 610 adhesive sealant and wedi building boards reduces installation time by up to 50% because no further sealing is required, even in areas of high humidity, although Wetrooms Online would always recommend the tapping and tanking of all joints, in addition to the use of wedi 610.

Applications:

For adhesion and sealing of wedi building boards and wedi Fundo elements. For attachment of various materials including wood, metals (aluminium, galvanised steel, high-grade steel, brass, copper), hard PVC, soft PVC and tiles to the wedi building board/Fundo system.

wedi 610 adhesive sealant:

mono-component adhesive sealant
for bonding and sealing of wedi building boards also with wood, glass, metals, PVC, bricks and tiles
strongly adhesive
quickly water-resistant
resistant against the effects of weather and chemicals
free of solvents, silicon and PCP
limited shrinkage
can be painted over (DIN 522452, part 4)

Technical properties:

Basis: Silan terminated polymers, neutrally linking
Colour: light grey
Hardening system: through air humidity
Stability under load: stable, < 2 mm (DIN 52454-ST-U 26-23)
Spray quantity: > 100 g/min (DIN 52456 – 6 mm)
Specific weight: approx. 1,5 g/cm2 (DIN 52451-PY)
Skin forming time (+23°C / 50%): approx. 15 min.
Through hardening (+23°C / 50%): approx. 3 mm / 24 hours
Volume change: < -3% (DIN 52451-PY)
Tensile strength (2 mm film): approx. 2,5 N/mm2
Elongation at break (2 mm film): approx. 400%
Shore A hardness: approx. 55 (DIN 53505, 4 weeks +23°C / 50 %)
Max. absorption of movement: 10 %
Temperature resistance: approx. -40°C to +100°C
Processing temperature: +5°C to +40°C (component temperature)

Downloads:

Wedi Fundo 610 Adhesive Sealant technical data sheet

 

Why purchase wedi products from Wetrooms Online?:

When you purchase any wedi product from Wetrooms Online, you are not only purchasing from an authorised wedi retailer, you are also purchasing from a wedi expert, recognised as such by wedi themselves.

We work closely with wedi to ensure that we offer the best possible wedi buying experience. Our staff regularly attend wedi UK head office to undertake training on the wedi range of products. As such we are able to offer help on the most suitable products and their application’s.

Wetrooms Online are proud to be wedi authorised retailers and wedi experts.