Impey WaterGuard Wet Room WALL & FLOOR Waterproofing Tanking Membrane Kit – 15m²

Impey WaterGuard WALL & FLOOR membrane Kit is the next generation of wetroom  waterproofing systems. It provides a faster and easier method of tanking a leak-free wet wall area.
WaterGuard® features a new fleece membrane with a self adhesive butyl rubber backing, which is fast and easy to install. Impey WaterGuard Wall has a maximum wall load bearing of 30kg/m2.

WaterGuard provides the complete leak-proof sealing solution, at just 1mm thick WaterGuard is strong, flexible and versatile making tanking a wet room faster and easier. It comes with a lifetime guarantee*, so you can install with complete confidence.

Unlike many other systems Impey WaterGuard® can be tiled as soon as it has been fitted saving both installation time and cost.

*Lifetime of the replacement of tiles.

At a glance:

• Co-Polymer membrane with a butyl rubber backing creates a completely watertight barrier.
• Polypropylene surface provides a key for the tile adhesive.
• Can be used with epoxy grout and solvent based sealers for stone tiles.
• Pre made corners for faster and easier installation.
• Self adhesive and supplied on a roll for easy application.
• No curing time to enable faster installation.
• Highly elastic, resistant to ageing, complete watertight barrier.
• Only 1mm thick with superior de-coupling properties of 10mm.
• WaterGuard Wall has a maximum wall load bearing of 30kg/m2.
• Fully compatible with 150w/m2 underfloor heating.
• Watertight Lifetime Guarantee (domestic use) if fitted in accordance with manufactures instructions.

Kit Contains:

5m² Impey WaterGuard® Floor Membrane
10m² Impey WaterGuard® Wall Membrane
2 x 500ml BAL primer
15m jointing floor tape
10m jointing wall tape
5 x internal corners
1 x external corners
2 x Butyl sealant

Additional jointing tape, internal and external corners can be purchased separately if required.

Please note: IMPEY WATERGUARD is NOT compatible with the Wetrooms Online WetBase trays.